Our Low Speed Area system properly adjusts the speed of the forklift in any given area. These speeds can be set to help within areas where more foot traffic takes place versus places that are primarily forklifts. Equipment with LSA Systems automatically identify the area where they find themselves and send a speed limitation signal to the truck. The Low Speed Area solution (LSA) uses a panel of reflective coded bands, located on the roof of the doors or in areas where speed changes. When the forklift drives underneath the panel, the sensors decode the change in the zone and proceed to activate the relay corresponding to that zone.
HOW DOES IT WORK?
Once the system is installed, its operation is very simple, and it requires no action from the operator. The truck that is equipped with the LSA Solution reacts upon entering an area in which the use of the system was predetermined, activating a signal that compels it to adapt to the established limit in the “slow” or “fast” zones.
WHERE CAN IT BE USED?
This solution is specially designed for warehouses, loading and unloading docks, industries or work spaces, although it can be perfectly adapted to different work sites that required special attention. In that sense and as our clients have been proving, the possibilities are very broad.
WHAT ELEMENTS DOES IT INCLUDE?
The PAS solution is marketed as a kit and it’s very easy to install. The system consists of the following elements:
T-10 TAG / T-10R TAG:
This device protects pedestrians from being run over by forklifts or any other industrial vehicles. The Tag makes the operator visible to the detector and warns the driver.
WIRELESS CHARGE STATION:
It is a charger for 12 Tags T-10R.
ACTIVATOR RFID:
The activator provides an immediate indication of the location and status of both an active T-10 tag and a localised TZ-tag, in order to improve their monitoring and identification capabilities. It uses low frequency signals to generate a safety zone around it.
TEST-TAG:
This is an active device that guarantees the correct functioning of the device.
VERIFICATION ANTENNA:
This small device is designed to check and register the correct functioning of the system.